HRV 40E
Product Features: The joint RV reducer is a high-precision control reducer that adopts the cycloidal pinwheel reduction structure.
Because the reducer has a large number of meshing gears at the same time, it is small and lightweight, and also has the characteristics of high rigidity and overload resistance. In addition, due to the small backlash, rotational vibration, and inertia, it has good acceleration performance, which can achieve smooth operation and obtain the accuracy of the correct position.
Product Introduction: The integrated angular bearing increases the rigidity of the reducer and realizes the ability of the reducer to support greater external loads. Therefore, the need for external support equipment is reduced, the number of required parts is reduced, reliability is increased, and total cost is reduced.
The 100% continuous meshing design of the cycloidal gear and the pin gear can achieve a large impact load capacity and a small backlash because the force is evenly distributed to the entire reducer gear.
Parameter Table
| Output speed r/min | 5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | ||
| Model | Reduction Ratio | Output torque N.m Input power KW | |||||||||
| Shaft rotation(R) | Housing rotation | ||||||||||
| HRV 40E | 57 | 56 | 568 0.40 | 467 0.56 | 412 0.86 | 373 1.03 | 355 1.23 | 338 1.40 | 305 1.70 | 285 2.00 | 269 2.25 |
| 81 | 80 | ||||||||||
| 105 | 104 | ||||||||||
| 121 | 120 | ||||||||||
| 153 | 152 | ||||||||||
Ordering Instructions / Customer Fill Out
