AT-C
Product features: Gleason parameter gear processing equipment is used to process the spiral bevel gears with grinding grade to ensure low backlash and low noise. The minimum backlash can be less than 2 arc minutes. Multiple precision-machined surfaces are easy to assemble and suitable for any installation direction. The design of the input and output shafts can be applied to the needs of various industrial applications. The high-precision ground spiral bevel gear set combined with the optimized planetary gear set can achieve a reduction ratio of 500:1.
Product introduction: The connection between the input end and the motor uses a collet-type locking mechanism, and is dynamically balanced to ensure the concentricity and balance of the interface at high input speeds, and zero backlash power transmission. The one-piece gearbox body ensures maximum rigidity and touch resistance. The complex structure and rigid design ensure that the highest torque and larger reduction ratio can be achieved under the condition of small size and light weight. Maintenance-free, no need to change lubricating oil, and long operating life.
Parameter Table
| Model No. | Stage | A Ratio^ | AT065 L AT065 L1 ATO65 H AT065 C AT065 R1 | AT075 L ATO75 L1 AT075 H AT075 C ATO75 R1 | ATO90 L ATO90 L1 AT090 H AT090 C ATO90 R1 | AT110 L AT110 L1 AT110 H AT110 C AT110 R1 | AT140 L AT140 L1 AT140 H AT140 C AT140 R1 | AT170 L AT170 L1 AT170 H AT170C AT170 R1 | AT210 L AT210 L1 AT210 H AT210 C AT210 R1 | AT240 L AT240 L1 AT240 H AT240 C AT240 R1 | AT280 L AT280 L1 AT280 H AT280 C AT280 R1 | |
| ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ATO65 LM ATO65 RM ATO65 4M | ||||
| Nominal Output Torque T2N | Nm | 1 | 1 | 25 | 45 | 78 | 150 | 360 | 585 | 1300 | 2150 | 3200 |
| 1.5 | 25 | 45 | 78 | 150 | 360 | 685 | 1300 | 2150 | 3200 | |||
| 2 | 24 | 42 | 68 | 150 | 330 | 544 | 1220 | 2010 | 3050 | |||
| 3 | 18 | 33 | 54 | 120 | 270 | 450 | 1020 | 1650 | 2850 | |||
| 4 | 13 | 28 | 48 | 100 | 224 | 376 | 860 | 1410 | 2300 | |||
| 5 | 12 | 25 | 40 | 85 | 196 | 320 | 740 | 1210 | 2000 | |||
| Max.Acceleration Torque T2B | Nm | 1 | 1~5 | 1.5 Selection Start | ||||||||
| Max. Acceleration Input Speed n1B | rpm | 1 | 1~5 | 7500 | 6500 | 5500 | 4500 | 3500 | 3000 | 2200 | 2000 | 1700 |
| Standard Backlash | arcmin | 1 | 1~5 | ≦6 | ≦6 | ≦6 | ≦6 | ≦6 | ≦6 | ≦6 | ≦6 | ≦6 |
| Max. Radial Load F Output d1 | N | 1 | 1~5 | 700 | 950 | 1450 | 2100 | 2700 | 3800 | 7800 | 9600 | 10500 |
| Max. Radial Load F Output d1 | N | 1 | 1~5 | 900 | 1100 | 1700 | 2700 | 4800 | 6600 | 11500 | 16000 | 18000 |
| Max. Axial Load Output d1 | N | 1 | 1~5 | 350 | 425 | 725 | 1050 | 1350 | 1900 | 3900 | 4800 | 5250 |
| Max. Axial Load Output d2 | N | 1 | 1~5 | 450 | 550 | 850 | 1350 | 2400 | 3300 | 5750 | 8500 | 9000 |
| Service Life | hr | 1 | 1~5 | 20000 | ||||||||
| Efficiency η | ％ | 1 | 1~5 | ≥98％ | ||||||||
| Operating Temp | ℃ | 1 | 1~5 | -10℃ 90℃ | ||||||||
| Lubrication | 1 | 1~5 | Selection Start | |||||||||
| Noise Level(n,= 1500rpm, No Load) | dB(A) | 1 | 1~5 | ≦68 | ≦70 | ≦74 | ≦76 | ≦77 | ≦78 | ≦80 | ≦82 | ≦83 |
Ordering Instructions / Customer Fill Out
